Bamboo LED Alarm Clock
New Wood Bamboo LED Alarm Clock, Reloj Despertador Modern Temperature Sounds Control LED Electronic Desktop Digital Table Clocks
Material :Bamboo & Wooden
Function:Acoustic Control Sensing
This is charging cable can be connected directly to a computer for charging
WOODEN LED ALARM CLOCK INSTRUCTION
display in turns;
3.12/24 hour format is available for selection :(initial mode:24-hour;January 1 2014;12:00 clock)
4.Every time can set up three groups of alarm, each alarm 1 minute, sound is:bi bi bi….
5.18:00-07:00 half luminance,and four luminance to set(L0-L1-L2-L3)
6.DC5V/500MA power supply by USB(or 4*AAA,sound control function is recommended ON, when batteries used
), built-in battery keeping time display program running inside but invisible outside
7.Sound control mode(power-saving mode)
2. Packing list:
Please kindly check all the details below when open the package
1.Digital wooden clock 1pc
2.User’s manual 1pc
3.USB charging cable 1pc
3. Display and keys
1.Display mode select:DP-1/DP-2 initial mode:DP1, press “SET” to transform DP1←→DP2
2.Sound control mode select(Power-saving mode on AAA battery) :press “DOWN” ,”on:SD”–:SD,” “ON:SD” means sound control works; “–:SD” means sound control closed
4.Press button “SET” for 3 seconds to enter into setting mode,you may set:
When YEAR symbol flashing,adjust by “UP” and “DOWN”, etc;
5.12 hour format display ;”PM” light is open
6.Display luminance adjustment
Press and hold the “UP” key for 3 seconds to enter the setting mode.Display “L3”, press DOWN key luminance decreases display “L2”, press UP luminance enhancement,four levels of L3-L0. A fter setting, holding down the “UP” key for 3 seconds exit setup
Any mistake or badness caused by improper operation could By renewed by button “RESET”,
please confirm new batteries inside;
1.Please use the clock dry area, due to all wooden housing,as it can not last long in wet,tremble, high temperature or temperature keeping changing area.
2.Avoid dropping down from floors, in case of causing broken.
3.Please use high quality AAA alkaline batteries. If the brightness dim or blinking, it means low battery, please change in time, in case battery solution leaking. When no power, please check if there are batteries inside to keep it working properly.
4.5V/500MA-1000MA DC adapter is applicable to the clock, please choose the compatible one.